The Intermatic P1353ME Pool Pump Timer Switch was made to be part of the I-Wave system as well as retro fit applications as well as after market. The three circuit clock for pool and spa can be installed into nearly any Intermatic enclosure.
The Intermatic P1353ME Pool Pump Timer Switch is able to be program up to a total of three circuits. You can choose from pre-programmed modes of operation, six in total. These include the cleaner pump combinations as well as the single or two speed pump. You can also use programmed modes that come with auxiliaries that can control pumps that go up to three horse power and other types of lighting that include landscape, underwater, and fountain lighting.
The Intermatic P1353ME Pool Pump Timer Switch has Countdown as well as override features that allow for interruptions in the cycle when service to the pool or spa is required. Protection and timing that come with the cleaner pump and filter pump combinations as well as two speed pumps that are integrated with the software for ultimate convenience. The circuit clock on the Intermatic P1353ME Pool Pump Timer Switch has both freeze and heater protection as well as the inclusion of the circuit clock only. The mechanism on the Intermatic P1353ME Pool Pump Timer Switch is able to be installed into many enclosures and gives you the choice of seven pre-programmed modes for operation, allowing you to switch it up as needed.
The Intermatic P1353ME Pool Pump Timer Switch has seven pre-programmed modes and the advantage of memory backup for extra security. With freeze protection, the Intermatic P1353ME Pool Pump Timer Switch will make sure that your system stays continually functioning so that you never have to worry about an interruption in service. Freeze and heater protection, also known as the fireman switch, give the Intermatic P1353ME Pool Pump Timer Switch excellent protection against the elements and an LCD readout allows for easy and simple user interfacing.
The Intermatic P1353ME Pool Pump Timer Switch can be used with any of the Intermatic PE153, PE15300, or the PE25300. It has nine on or off events a day. The Intermatic P1353ME Pool Pump Timer Switch also has an input of 120 volts and 240 volts as well as a Remote Command for the model 133PE1484A.
The Intermatic P1353ME Pool Pump Timer Switch runs from $180 to roughly $230, depending on the vendor.
The Intermatic P1353ME Pool Pump Timer Switch is CSA Listed as Certified. It is high quality with an LCD reader and multiple modes of programming, lighting, and modes. It is the easiest and fastest way to upgrade your pool and spa to a digital timer and has a guarantee of exchange of defective models within thirty days of purchase. It is 20A Resistive with 5 amps Tungsten for 120/240 VAC and 50/60 Hz and 5 Amps Ballast for 120/240 VAC and 50/60 Hz. The Intermatic P1353ME Pool Pump Timer Switch comes with a manufacturer’s one year warranty.
Modes Of Operation
Mode 1: For Aux 1-3, the time switch has three circuit switches that control auxiliary devices.
Mode 2: For Pump High and Low and Aux3, this 2 circuit switch controls a 2-speed pump and the third switch controls auxiliary.
Mode 3: For Pump, Cleaner Pump, and Aux 2, this is a 3 circuit switch. The first switch controls a single-speed pump, the second any auxiliary, and the third a booster and cleaner pump. Timing and protection is pre-programmed in this mode.
Mode 4: Pump High and Low, Cleaner Pump,, this is a 2 circuit switch. The first and second switches control a two speed pump with the third controlling a booster and cleaner pump. Protection with 2 speed pumps and the booster/cleaner pumps are pre-programmed in this mode.
Mode 5: For Pump L1 & 2 as well as Aux 3, this is a 2 circuit switch. The first and second switch control a 240V pump, requiring the L1 & L2 to be disconnected when pump’s off. The third switch controls auxiliary.
Mode 6: Has Aux 1-3. The single circuits are defined generically and are able to control loads within its individual ratings. All circuits act independently. The fireman switch is closed off when Circuit 1 is manually turned on. The heater is turned on in the same way.